|
|
|
|
|
|
4mm & 3/32" ALU NUT FOR 1/10 SET-UP SYSTEM (2)
|
|
|
4mm & 3/32" ALU NUT FOR 1/10 SET-UP SYSTEM (2) The A-Plus set up system nuts with both 4mm and 3/32" threads for 1/10 cars. They are made of 7075 aluminum, and CNC-machined.
|
|
|
|
|
|
|
|
|
|
CHASSIS DROOP GAUGE BLOCKS 10 MM FOR 1/10 (2)
|
|
|
CHASSIS DROOP GAUGE BLOCKS 10 MM FOR 1/10 RC Cars The A-Plus RC 10 mm Chassis Droop Gauge Blocks come in a set of 2 for use with 1/10 RC on road chassis. These gauge blocks are made of 7075 aluminum, and CNC-machined. When used with the AP-881004 Chassis Droop Gauge, these gauge blocks are used to check and adjust the front and rear suspension droop settings.
|
|
|
|
|
|
|
|
|
|
4mm & 3/32" ALU NUT FOR 1/10 SET-UP SYSTEM (4)
|
|
|
4mm & 3/32" ALU NUT FOR 1/10 SET-UP SYSTEM (4) The A-Plus set up system nuts with both 4mm and 3/32" threads for 1/10 cars. They are made of 7075 aluminum, and CNC-machined.
|
|
|
|
|
|
|
|
|
|
RIDE HEIGHT GAUGE 0 MM TO 15 MM (BEVELED)
|
|
|
RIDE HEIGHT GAUGE 0 MM TO 15 MM (BEVELED) The A-Plus RC RIDE HEIGHT GAUGE 0 MM TO 15 MM (BEVELED), in increments of 0.5 MM is for use with 1/10 R/C Cars. The gauge is made of 7075 aluminum, and CNC-machined. The Ride Height Gauge is use to check 0 to 15 MM of droop.
|
|
|
|
|
|
|
|
|
|
CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/10 RC CARS
|
|
|
CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/10 RC Cars The A-Plus RC -3 to 10 mm Chassis Droop Gauge is for use with 1/10 RC on road chassis. The gauge is made of 7075 aluminum, and CNC-machined. When used with the AP-881001 Chassis Droop Gauge Blocks, the gauge is use to check and adjust the front and rear suspension droop settings. The gauge ranges from -3 to 10 mm.
|
|
|
|
|
|
|
|
|
|
QUICK DOWNSTOP GAUGE TOOL 1.0 ~ 6.5MM
|
|
|
QUICK DOWNSTOP GAUGE TOOL 1.0 ~ 6.5MM The A-Plus RC QUICK DOWNSTOP GAUGE TOOL 1.0 ~ 6.5MM, in increments of 0.5 MM is for use with 1/10 R/C Cars. The gauge is made of 7075 aluminum, and CNC-machined. This tool is highly precise for quick measurement of downstop settings. It features an integrated support block that supports the chassis, while the stepped scale indicates the downstop setting.
|
|
|
|
|
|
|
|
|
|
ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM
|
|
|
ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM The A-Plus RC Ultra-Fine Chassis Droop Gauge 4.0 - 6.0 MM, in increments of 0.2 MM is for use with 1/10 R/C Cars. The gauge is made of 7075 aluminum, and CNC-machined. When used with the AP-881001 Chassis Droop Gauge Blocks 10 MM, the gauge is use to precisely check and adjust the front and rear suspension droop settings.
|
|
|
|
|
|
|
|
|
|
CHASSIS DROOP GAUGE 0 TO -13 MM FOR 1/8 OFF-ROAD & TRUGGY
|
|
|
CHASSIS DROOP GAUGE 0 TO -13 MM FOR 1/8 OFF ROAD AND TRUGGY RC CARS The A-Plus RC 0 to -13 mm Chassis Droop Gauge is for use with 1/8 RC off road and Truggy chassis. The gauge is made of 7075 aluminum, and CNC-machined. When used with the AP-881003 Chassis Droop Gauge Blocks, the gauge is use to check and adjust the front and rear suspension droop settings. The gauge ranges from 0 to -13 mm.
|
|
|
|
|
|
|
|
|
|
CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/8 & 1/10 RC CARS
|
|
|
CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/8 & 1/10 RC Cars The A-Plus RC -3 to 10 mm Chassis Droop Gauge is for use with 1/8 & 1/10 RC on road chassis. The gauge is made of 7075 aluminum, and CNC-machined. When used with the AP-881002 Chassis Droop Gauge Blocks, the gauge is use to check and adjust the front and rear suspension droop settings. The gauge ranges from -3 to 10 mm.
|
|
|
|
|
|
|
|
|
|
CHASSIS DROOP GAUGE BLOCKS 20 MM FOR 1/8, 1/10 (2)
|
|
|
CHASSIS DROOP GAUGE BLOCKS 20 MM FOR 1/8 & 1/10 RC Cars The A-Plus RC 20 mm Chassis Droop Gauge Blocks come in a set of 2 for use with 1/8 & 1/10 RC on road chassis. These gauge blocks are made of 7075 aluminum, and CNC-machined. When used with the AP-881005 Chassis Droop Gauge, these gauge blocks are used to check and adjust the front and rear suspension droop settings.
|
|
|
|
